¿Falta información o es incorrecta? Avísanos, por favor.
Por favor, escoja una opción
¡Hemos recibido sus comentarios! Le agradecemos que nos ayude a mejorar nuestra página.
This remote dropper lever solves many of the common problems associated with dropper remotes thanks to its compact, ergonomic and sturdy design. It features a hard-wearing aluminium construction with a Delrin axle, making it more than capable of handling all the abuse that's associated with long days in the saddle. Its patent-pending ReMote LA has a longer lever arm than the standard ReMote and is ideal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote.
Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.
Compatible with all cable-actuated dropper posts.
Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.
Measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.
ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware
ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware
ReMote IS-II for Shimano I-Spec II - Includes IS-II hardware
UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration.
Large diameter ball-bearing pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation.
Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.
Low-profile, Light Action lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
Integrated cable adjustment: The ReMote LA’s solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available.
High-traction lever: A machined surface ensures that control is not lost- even in the worst of conditions.
Broad compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts.
Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.
Manufacturer's Part Numbers:
WTREMOTELAISAB Black Option 1 IS-AB
WTREMOTELAISEV Black Option 2 IS-EV
WTREMOTELAISII Black Option 3 IS-II
Estaremos encantados de reembolsarte el valor de cualquier artículo comprado en Wiggle si nos lo devuelves en un plazo de 365 días, a excepción de los vales regalo de Wiggle, de los productos de nutrición y de los artículos personalizados, a menos que sean defectuosos.
Nota importante: la devolución de bicicletas y otros artículos voluminosos seguirá un proceso diferente. Por favor, ponte en contacto con nuestro equipo de Atención al Cliente para acordar la recogida del producto. Ten en cuenta que este servicio de recogida conlleva una tarifa, a no ser que se trate de un artículo defectuoso.Los artículos devueltos deberán encontrarse en su embalaje original y no haber sido usados, a menos que los artículos sean defectuosos.